G Pen Connect
The G Pen Connect is a revolutionary alternative to conventional concentrate consumption that heats to temperature within five seconds of activation to deliver high-density, quality vapor production without the hassle of a torch and exposed nail. Some call it an E-Nail, or simply a plain ol' rig! Powered by a ceramic heating element and featuring patented reverse airflow technology, all you need is any glass-on-glass water piece to 'Connect' to! The G Pen Connect operates evenly and efficiently to deliver smooth and powerful draws for your concentrates.
Perfect for home use, each G Pen Connect kit comes standard with a hemp travel pouch anyways, making storage and transportation just as easy as using the Connect itself.
GLASS ON GLASS
The G Pen Connect is a flexible device, and will work with any water piece that has a glass-on-glass joint. Your Connect will come with a 14mm Male adapter, suitable for any piece with a 14mm Female joint. You can also purchase a 10mm, 14mm, and 18mm adapter in both Male and Female separately. Please note that with the battery attached, the Connect may change the balance point of your piece so be careful to avoid any spills or breakage! A spring-loaded carb release button creates instant airflow, allowing the chamber to be effortlessly cleared.
With a sleek and modular design, each of the G Pen Connect’s parts attaches magnetically, including the tank lid which replaces the more traditional carb caps. The Connect has a simple design consisting 4 main parts which can be assembled or taken apart easily. The Tank with Magnetic Lid, Metal Body or Housing, Battery and Glass Adapter. The housing features a spring loaded carb release or 'turbo valve' as some may call it, which clears your water piece. It also features a ceramic bowl, which means this device is better suited for those who value flavour over vapor density. The firing button is located on the battery itself and faces upwards, making it very ergonomic and easy to use.
Once the Connect has been powered on, you can cycle through its three voltage output settings by simply clicking the power button three times. The G LED on the button will change color, corresponding to the following voltage settings:
Low (Blue) - 3.1V
Medium (Green) - 3.6V
High (Red) - 4.1V
Once the G Pen Connect is powered on you can also use the Extended Draw Mode by clicking the button twice. Once at temperature, the G LED will remain solid and continue to heat for 10 seconds without the need for holding the button down. This automatic heating can be cancelled at any time by clicking the button.
The G Pen Connect Battery is packed with 850 mAh of power and uses an easy, snap-in magnetic connection for quick and effortless setup. Although small, the device is capable of driving several back-to-back sessions while supporting pass-through charging whenever needed.
Grenco offers a 1-year warranty against defects in materials and workmanship under normal use. Register your device on the official manufacturer website once you receive it from us. If a physical defect arises and a claim is received within the Warranty Period, Grenco Science usually exchanges the defective product with a new product.
The G Pen Connect is stupidly easy to clean. You would only need to thoroughly clean the ceramic tank. Soak a cotton swab/bud in some Marijoinlah Swish or similar isopropyl cleaners and squeeze out the excess moisture. Swab the tank and glass parts removing any residue or dirt. You can also initiate a burn-off to get rid of more stubborn residue. Operate the device using the manual heating mode on the highest voltage setting to perform the burn-off. We also always recommend a burn-off after cleaning to remove any residue cleaning solution
- 1 G Pen Connect Battery
- 1 G Pen Connect Tank
- 1 G Pen Connect Housing
- 1 G Pen Connect Male Glass Adapter (14mm)
- 1 G Pen Connect Male Glass Adapter Connector
- 1 Micro USB Charging Cable
- 3 Replacement O-Rings
- 1 G Pen Connect Travel Case
Display: LED indicators
Size: 11.2 x 3.2 x 2.6cm
Heating: Ceramic Heating Element
Heat-up time: 5-10 seconds
Power source: Battery (850mAh)
Temperature: controlled through voltage - 3.1V, 3.6V & 4.1V