YLL Induction Heater 2.0

Pocket Ovens
Couldn't load pickup availability
FREE Same Day Delivery
FREE Same Day Delivery
Same day delivery for customers in Selangor and Kuala Lumpur is free, when you spend RM500 or more.
- Place your order before 10am.
- Select the Same Day Delivery option at checkout.
- Available weekdays excluding Malaysian/Selangor public holidays.
Full details on our Shipping Policy.
Customs Clearance Insurance
Customs Clearance Insurance
We'll make sure you get your vaporizer delivered or we'll give you a refund!
If your order does not clear customs (seized, lost or returned), POCKETOVENS.COM will do one of the following:
- Reship the order up to (1) time; OR
- Refund the order, excluding shipping cost, Customs Clearance Insurance cost and any transaction fees.
Failure to pay customs duties or import taxes imposed will not activate this insurance.
The YLL Induction Heater 2.0 removes the need for a lighter flame to heat your DynaVap. This DynaVap induction heater is super easy to use and portable. Adjust power between 30W - 60W for different heating profiles and enjoy superior vapor as your DynaVap Cap is uniformly heated in 10-15 seconds.
YLL IH 2.0 purchased from Pocket Ovens comes with a FREE 8.5mm Insert!
The different insert heights (11.5mm and 8.5mm) allow you to adjust the hole depth of the heating chamber. Your DynaVap Tip & Cap will be able to rest comfortably at different heights, allowing more heating styles and effects!
Features:
- Easy to use with OLED display & 3 buttons
- Adjustable heating power 30W – 60W
- Boost Mode
- Customizable heating time
- Both 11.5mm and 8.5mm inserts included -*Pocket Ovens Special!*
- Portable
- USB-C charging
- Runs on replaceable 18650 batteries (not included)
- Fits the DynaVap Armored Cap
- 6 months warranty
Induction Heaters provide highly accurate, customisable and consistent heating using electricity and will prevent under- & overheating your DynaVap device.






Collapsible content
Features
MADE FOR DYNAVAP
Induction Heaters are a gamechanger for DynaVap devices. No more needing to refill your lighter and getting disappointed by inconsistent heating!
ADJUSTABLE CHAMBER DEPTH
We include both 11.5mm and 8.5mm inserts for our customers! The heating chamber on the YLL IH 2.0 is a glass lined hole. With the inserts, your DynaVap can rest comfortably in the hole.
The height adjuster tool is stored under the device. Pop the battery cover off and inside you will find a flat metal tool. The insert height can be adjusted by screwing in/out the insert. This allows your Tip and Cap to be uniformly heated as the DynaVap is kept in a fixed position and induction heating is most stable.
AUTOMATIC HEATING
The induction heating will begin as soon as your DynaVap Tip & Cap is in the glass chamber. It will stop heating once it detects that you have removed the DynaVap from the chamber.
ADJUSTABLE POWER
Customize your heating level between 30W to 60W in 5W increments. Press the + button and - button to adjust.
BOOST MODE
Activates maximum output mode, allowing up to 70W output when the battery is fully charged. Press + and - buttons simultaneously to activate or deactivate Boost Mode.
ADJUSTABLE HEAT TIME
A countdown timer starts once the device is heating. While in standby mode, press the center button twice to adjust the heating duration. Press the + and - buttons between to set a duration betweern 10 - 60 seconds.
SAFETY FIRST
Overheat Protection: Heating stops when the mainboard temperature exceeds 85°C and a "COOLING" is displayed on the screen.
Overcurrent Protection: When the operating current exceeds 10A, "OVER CURRENT" is displayed, and pressing the ignition button returns to the main interface.
Low Voltage Protection: When the battery voltage drops below 6.6V without heating, it displays LOW BATTERY. When the battery voltage drops below 5.6V during heating, it displays WEAK BATTERY. Please charge promptly.
Overload Protection: When an unsupported load is inserted, the countdown timer blinks.
Compatible with
- all DynaVap vaporizers
What's In The Box
- YLL IH 2.0 Induction Heater
- USB to USB-C Charger Cable
- 11.5mm and 8.5mm inserts
- Instructions for Use
Device Specs
Heating: Electromagnetic Induction Heating
Display: 0.96" White OLED Display
Power: Dual 3.7V Lithium Batteries
Charging: USB-C, Voltage 5V+/-0.5V, 2A Typical Current
Pass-through Charging: No
Max Current: 9A / 70W (Boost on Full Charge)
Max Heating Time: 60 seconds
Auto-Off: 300 seconds of inactivity
Dimensions: 115mm(L) x 63mm(W) x 33mm (H)
Weight: 160g without batteries
Subscribe to our emails
Receive a 10% DISCOUNT CODE upon sign up confirmation.
We promise no spam or overselling! Join the club to learn about new collections and exclusive offers. Check out our blog articles for a taster!